Find A Local Rep

1-800-SULLAIR

1-800-785-5247 or 1-219-879-5451
background

Two-Stage Rotary Screw Air Compressors

OPTIMUM EFFICIENCY AND POWER SAVINGS

Sullair Two-Stage compressors feature a superior end-to-end design for optimum efficiency and power savings. 

  • Longer air end life
  • No loss of capacity or efficiency 
  • Lower operating costs

 

 

 

Models vary by region. Please contact your Sullair sales representative for more details.

Jump To:

Specs Contact Us
TS-32
CFM
CFM

Flow

590 – 3000 cfm
16.7 - 84.9 m³/min
Pressure
Pressure

Pressure

100 – 175 psi
6.8-12 bar
Horsepower
Horsepower

Power

150 – 600 hp
112 – 447 kw

  • Multi-Stage Air-Fluid Separation
    • Dual nested Optimizer™ separator elements, reduce fluid carryover to a maximum of 1 ppm
    • Reduced carryover lowers make-up fluid costs
    • Pleated Optimizer elements lower initial pressure drop for greater efficiency and extends element life
    • Easy to change with built-in lid lifting device
  • Fiberglass Fluid Filter
    • Aircraft-quality media provides better filtration
    • Up to 20% more efficient than conventional paper elements
    • Lengthens life of the compressor
  • Optimalair® Heavy-Duty Air Intake Filter
    • Includes remote air intake connection
    • Provides finest inlet filtration in the industry (0.4 microns using Fine Fiber Technology)
    • Keeps fluid clean and extends life of other internal components
    • Reduces pressure drop throughout the operating life, resulting in energy savings
  • Two-Stage Compressor Air End
    • Delivers more air
    • Reduces power consumption
    • Extends air end bearing life
  • Enhanced Serviceability for Air-Cooled Oil Cooler and Aftercoolers
    • Easy to remove panels provide access for cleaning coolers
  • Motor Coupled to Air End Through Non-Lubricated, Flexible Coupling
    • Allows use of standard NEMA frame motor
    • Simplifies installation and start-up
  • Variable Capacity Control System Featuring Spiral Valve Technology
    • Lowers part-load operating costs
    • Reduces cycling duty on package
    • Maintains consistent plant pressure
    • Simple control
    • Reduces bearing load
  • Sullair Supervisor™ Controller
    • Computer-compatible microprocessor controller has simple graphic illustration of monitored functions and an easy-to-read keypad
    • Constant readout of pressure and temperature
    • On-demand readout of all operating and maintenance conditions
    • Monitors key functions and safety shutdowns
    • Power failure auto restart
    • Dual control, provides automatic start-stop operation
    • Lead-lag and sequencing with multiple compressors
    • Service and preventive maintenance schedule
    • Hours are recorded for “Run,” “Loaded” and “Consumable Parts”
    • Fault history with sensor readings
    • “Help” key provides built-in troubleshooting
  • Easy Maintenance
    • Access to all critical components even with a sound enclosure installed
  • Time Proven End-to-End Design
    • Reduces pressure drop through stages
    • Easy serviceability
  • NEMA 4
    • Wye Delta starter for softer start
  • Bearing Fluid Reservoirs
    • Ensure that fluid is available at start-up
    • Extend air end life
  • Genuine Sullube® Factory Fill
    • A 10,000-hour extended-life synthetic fluid powered by Dow technology, Sullube has been used in more than 50,000 compressors worldwide
  • Sullair 10-Year Diamond Warranty*
*Maintaining the Sullair 10-Year Diamond Warranty requires using Genuine Sullair parts and fluids, as well as the oil sampling program.

  • PristineFG™
    • Food Grade Designed specifically for compressors used in food, beverage and pharmaceutical applications and meets FDA and USDA H-1 requirements
  • Variable Speed Drive (VSD) 

Available models

60 Hz

  • TS-20—150 to 250 hp (112 to 186 kW), 616 to 1200 acfm (17.4 to 33.9 m3/min), 100 to 175 psig (6.8 to 12 bar) 
  • TS-32—200 to 350 hp (149 to 261 kW), 1100 to 1875 acfm (31.1 to 53.1 m3/min), 100 to 175 psig (6.8 to 12 bar)
  • TS-32S—400 to 600 hp (298 to 447 kW), 1681 to 3000 acfm (47.6 to 84.9 m3/min), 100 to 150 psig (6.8 to 10.3 bar)
  • V-320TS—200 to 450 hp (149 to 336 kW) Variable Speed Drive (VSD), 945 to 2310 acfm (26.7 to 65.4 m3/min), 100 to 150 psig (6.8 to 10.3 bar)

50 Hz

  • TS-20—150 to 250 hp (112 to 186 kW), 590 to 990 acfm (16.7 to 28.0 m3/min), 100 to 175 psig (6.8 to 12 bar)
  • TS-32—200 to 350 hp (149 to 261 kW), 1021 to 1845 acfm (28.9 to 52.3 m3/min), 100 to 175 psig (6.8 to 12 bar)
  • TS-32S—400 to 600 hp (298 to 447 kW), 1942 to 2900 acfm (55.0 to 82.1 m3/min), 100 to 150 psig (6.8 to 10.3 bar)

NEED HELP FINDING THE
RIGHT SOLUTION